การทำกรอบรูปวิทยาศาสตร์
การทำกรอบรูปวิทยาศาสตร์ถืดได้ว่าเป็นอาชีพหนึ่งที่น่าสนใจไม่น้อยเลยทีเดียวน่ะค่ะ เนื่องจาก
ใช้ต้นทุนน้อย และยังมีวิธีการทำที่ไม่ยุ่งยากอะไร ท่านสามารถทำได้กันเพื่อเป็นอาชีพหลัก หรืออาจจะ
ทำเป็นอาชีพรองก็ได้ เพราะเป็นงานง่าย สามารถทำหลังจากเลิกงานประจำวันก็ได้ รับรองว่าได้กำไรกัน
เห็นๆ ขั้นตอนการทำและวัสดุอุปกรณ์ มีดังนี้
กรอบรูปวิทยาศาสตร์ วิธีที่1
วัสดุอุปกรณ์
ไม้ทำกรอบรูปวิทยาศาสตร์,เรซิ่นแผ่นเคลือบ,เครื่องเคลือบเย็น,ลูกกลิ้ง,เส้นทอง.กาวลาเท็กซ์
ภาพที่ต้องการทำ,ตัวเร่งปฏิกิริยา ฟิล์มไมร่า, ตะไบ,ขาตั้ง
ขั้นตอนการทำ
- ติดกระดาษลายกับไม้ แล้วใช้ลูกกลิ้งกลิ้งให้เรียบร้อย พอแห้งใช้คัตเตอร์ตัดให้ชิดกับไ่้ม้มากที่สุด
- จากนั้นนำรูปภาพไปวัดขนาดให้อยู่ตรงกลางแผ่นไม้แล้วทำจุดกำกับไว้
-นำรูปภาพไปทากาว วางลงบนไม้ตามจุดที่กำกับไว้ใช้ลูกกลิ้ง กลิ้งภาพให้เรียบ
- ติดดิ้นทองรอบรูปภาพ
- ติดกระดาษกาวทั้ง ด้านของไม้ส่วนที่เลยให้พับเก็บไว้ด้านหลัง
- ผสมน้ำยาเรซิ่น ในอัตารส่วนเรซิ่น 1 แก้ว/ตัวเร่ง 1 ช้อน แล้วใช้ไม้คน
- เทน้ำยาเรซิ่นลงตรงกลางภาพ แล้วใช้แผ่นฟิิล์มไมร่่าวางทับบนน้ำยา
- ใช้ลูกกลิ้งลากกลางภาพไปทั้ง 4 มุมแล้คว่ำภาพทิ้งไว้ให้แห้ง ดึงฟิล์มไมร่าออก
- ตกแต่งขอบให้เรียบร้อย จากนั้นนำแผ่นเคลือบมาปิดทับไว้ด้านบนของกรอบรูปแล้วนำเข้าเครื่องเคลือบเย็นก็จะได้กรอบรูปวิทยาศาสตร์ ที่สวยงามแล้ว
กรอบรูปวิทยาศาสตร์ วิธีที่ 2
การทำกรอบรูปวิทยาศาสตร์ เป็นการนำรูปถ่ายที่เราประทับใจ และต้องการนำมาตั้งโชว์ หรือเก็บไว้ได้นาน โดยยังมีสภาพที่สวยงามอยู่ เราจึงนำไปตั้งไว้บนโต๊ะก็ได้
วัสดุอุปกรณ์
- น้ำยาโปลีเอสเตอร์เรซิ่น
- ตัวทำปฏิกิริยา หรือตัวทำให้แข็ง
- กาวลาเท็กซ์
- ฟิล์มไมลาร์แบบเงา
- กรอบไม้สำหรับขึงฟิล์มไมลาร์ให้ตึง(ความใหญ่ของกรอบไม้ขึ้นกับขนาดของแผ่นรองรับรูปที่จะเคลือบ)
-น้ำยากันซึม ใช้ทาเฉพาะภาพที่เป็นสิ่งพิมพ์
- การขัดแต่งขอบไม้ 4 ด้านมีกระดาษทรายเบอร์ 150
- ถ้วยตวงและไม้กวนเรซิ่น
- เส้นทองใช้สำหรับติดขอบรูปเพื่อเพิ่มความสวยงามของภาพ
- แผ่นไม้อัดเรียบหนา 10 มิลลิเมตร
- หรือแผ่นกระดาษอัด ขนาด 5 นิ้ว X7 นิ้ว(ใช้กับรูปขนาด 3 นิ้ว X 5 นิ้ว)
- เทปกระดาษชนิดบาง
- อาซีโทน น้ำยาล้างเรซิ่น
- ลูกกลิ้งยาง
-กระดาษหนังสือพิมพ์
- กระดาษพิมพ์ลายไม้ (หรือลายอื่นๆ ตามต้องการ) ใช้ปิดทำผิวหน้าแผ่นไม้ก่อนติดรูป
วิธีทำ
- ตัดไม้อัด ตามขนาดของรูปที่จะทำการเคลือบ (ควรเว้นให้มีขอบด้วย) แล้วนำมาขุดให้ เรียบ โดยเฉพาะบริเวณขอบ
- ทากาวกับหน้าไม้อัด เพื่อติดกระดาษทำพื้นหลังและขอบข้าง
- นำกระดาษพื้นหลัง และขอบข้างมาติดให้เรียบ
- ใช้ลูกกลิ้ง กลิ้งไล้ฟองอากาศให้เรียบ
- ตัดกระดาษที่เกินของไม้ แล้วนำรูปที่จะเคลือบมาทากาว ติดตรงกลาง ทับบนพื้นหลังแล้วกลิ้งให้เรียบ ติดขอบด้วยกระดาษติดขอบให้เรียบร้อยสวยงาม
- ในขณะที่รอให้ภาพแห้ง ก็มาทำการเตรียมขึงแผ่นแฟรมกับกรอบไม้ โดยเจาะรูที่เฟรมขึงให้ตึงด้วยหนังยาง
- เทเรซิ่น 25 ซีซี แล้วผสมตัวทำแข็งลงไป 5-7 หยด
- รีบกวนเร็วๆ ให้เข้ากัน (ประมาณ 1 นาที) แล้วเทเรซิ่นลงกลางรูป
- รีบนำฟิล์มไมลาร์ที่ขึงตึงไว้ วางทับไปที่น้ำยาเรซิ่น แล้วใช้ลูกกลิ้งยาง กลิ้งบนฟิล์ม ให้น้ำยาที่อยู่ใต้ฟิล์มวิ่งไปทั่วรูปจนไม่มีฟองอากาศ (เวลาไล่น้ำยาควรกลิ้งจากตรงกลางไปหาขอบทั้ง 4 ด้าน และออกแรงกดพอสมควร เพื่อไล่ฟองอากาศออกให้หมด) ใช้เวลากลิ้งน้ำยาเรซิ่นไม่ควรเกิน 5 นาที เสร็จแล้วทิ้งให้น้ำยาแห้งสนิทประมาณ 2-3 ชัวโมง จึงแกะแผ่นฟิล์มออก
- เคลือบน้ำยาเรซิ่นที่ 2 โดยนำกระดาษทรายเบอร์ 150 ขัดให้ผิวเรซิ่นหยาบๆ เสียก่อน การขัดต้องขัดเฉพาะบริเวณขอบที่เป็นลายไม้ อย่าขัดลง กลางรูป เพื่อให้น้ำยาเรซิ่นที่เคลือบซ้ำ ติดแน่น ไม่ลอกออกง่าย (ส่วนที่ขัดจะมัวไม่ต้องตกใจ เมื่อเคลือบครั้งที่ 1 ทุกอย่าง ผลที่เกิดจากการเคลือบครั้งที่ 2 จะทำให้ผิวเรซิ่นเรียบ ไม่สะดุดความหนาของรูปหรือเส้นทองที่ติดไว้
- ผึ่งให้แห้ง แล้วค่อยๆ แกะเฟรมออก
Picture Framing Science
The frame consists of science as a career is an interesting one, not least because ever wrote.
Least-cost And also how to do that without hassle. You can do this for a career, or could be.
Occupation was made It is easy Can do the work for you. That took profit
The other procedures and materials were as follows.
Scientific Method 1 Frame
Material
Timber Framing Science, resin coated sheet, cold laminating rollers, golden lines. Adhesive latex.
Images to be, the catalyst film Myra, filings, tripod.
Procedures
- Paper with a wooden stick Then carefully roll the roller When dry, use a cutter to cut as close to not possible.
- Then the images to measure the centering wood and make a mark.
- Pictures to glue Placed on the wood as directed by the roller. Roll image smoothing
- The gold braid around the image
- Paper and Glue Required of them to fold up the rear.
- Mix resin solution In the AL, the first glass resin / catalyst and 1 tablespoon of the wood.
- Pour liquid resin into the center. I use the Palm Jumeirah Negative overlaid on a solution.
- Use the roller drag images to the four corners left to dry upside down image. Pull out the film Myra
- Decorative border in order Then the plate to cover the top of the frame, then imported porcelain dinner would not frame the science. The beautiful
Scientific Method 2 Frame
Picture Framing Science This is to take photos that have impressed us. And want to stand Or stored for We also have a beautiful house. We have to set it on the table.
Material
- Inter liquid ester resin.
- The reaction Or stiffener
- LATEX
- The film does not leave a shadow.
- Wooden frame for stretching the film does not leave the skin (the largest of the wooden frame to the size of the substrate to be coated).
- Liquid liner applied only images for print.
- Polishing Edge Irons 4-sided sheet number 150.
- Measuring and preserves resin.
- A gold for the outline to enhance the beauty of the image.
- Smooth veneer thickness of 10 mm.
- Or 5-inch sheet of paper X7-inch (with a 3-inch X 5 inch).
- Paper Thin
- Acetone remover resins.
- Rubber
- Paper
- Fine Paper (Or any other pattern you like) run off the surface of the wood before installation.
How do
- Cut the plywood according to the size of the image to be coated. (Should be a Edge) was used to dig to smooth the edges.
- Plywood glued to the page The background paper and the edges.
- The background paper And stick to smooth the edges.
- Use a roller to smooth rolling air bubbles.
- Cut the excess paper to the wood. I used the glue to coat the middle layer of the background and then rolled to flatten. Edge to Edge paper beautifully done.
- While waiting for the paint dries. Stretched membrane sheets were prepared with a wooden frame. The holes in the frame with a rubber band stretched taut.
- Pour 25 cc of mixed resin into a solid 5-7 drops.
- I recently stir to combine (about 1 minute) then pour the resin into the picture.
- Millar brought the film to be strained. Placed over the resin solution. Then use the roller to roll on the liquid film is the film's running around with no bubbles. (The solution should be rolled out from the center to the edges on all four sides and press it. To expel air out), roll the resin solution should not take more than 5 minutes and then left to dry cleaners about 2-3 hours, so unpack the film out.
- Coating Resin 2 by the sandpaper number 150 polished surface resin roughly before the polishing to polish the edge of the wood, I sanded down the middle so that the liquid resin coating over adhesive does not peel off easily. (As opposed to the dull, do not panic. When the first coat all the effects of the second coating to the surface smoothness resin. Smooth the thickness of the gold line attached to it.
- Dry, then gently carved frames.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น